Skip to content
  • Services
  • Work
  • About
  • Contact
ende

Terms and conditions

For all contracts with businesses for design, development and consulting services. Last updated: 17 November 2026.

This English version is provided for convenience. In the event of discrepancies, the German version prevails.

§ 1 Scope

1.1 These General Terms and Conditions (GTC) apply to all contracts between Studio Flaer GmbH, Urbanstraße 71, 10967 Berlin, Germany, registered in the commercial register of the Local Court (Amtsgericht) Charlottenburg under HRB 239228 B (hereinafter “Studio Flaer”), and its clients for services in the fields of UX research, UX, UI and product design, industrial design, design systems, prototyping, software development and programming, consulting, workshops, and services performed by specialists and freelancers in client projects.

1.2 These GTC apply exclusively to entrepreneurs within the meaning of Section 14 of the German Civil Code (BGB), legal entities under public law and special funds under public law. Studio Flaer does not enter into contracts with consumers. By placing an order, the client confirms that it is acting in the course of its commercial or independent professional activity.

1.3 These GTC also apply to all future contracts with the client, even if they are not expressly incorporated again. The version valid at the time the contract is concluded applies.

1.4 General terms of business, purchasing or licensing of the client do not become part of the contract, even if Studio Flaer does not expressly object to them or performs services without reservation in knowledge of such terms. They only apply if Studio Flaer expressly agrees to them in text form. This also applies to terms referred to in purchase orders, purchase order systems, supplier portals or order confirmations of the client; accepting such terms by clicking in a portal does not constitute consent.

1.5 Individual agreements take precedence over these GTC. In the event of contradictions, the following order of precedence applies: (1) individual contract or service agreement, (2) offer by Studio Flaer, (3) service description or statement of work, (4) these GTC, (5) statutory provisions.

§ 2 Offer and conclusion of contract

2.1 Offers by Studio Flaer are non-binding and valid for 30 days from their date, unless the offer states otherwise. Cost estimates, effort estimates and budget ranges are non-binding unless expressly designated as a fixed price.

2.2 The contract is concluded when the client accepts the offer in text form (e.g. by e-mail or electronic signature) or Studio Flaer confirms the order in text form. If Studio Flaer starts work at the client’s request before formal acceptance, the most recently submitted offer is deemed agreed.

2.3 The scope of services is conclusively defined by the most recently submitted offer or service description. Services beyond this are not owed.

2.4 Offers, concepts and calculations by Studio Flaer are confidential and may not be passed on to third parties without consent, in particular not to other service providers for the purpose of a price comparison.

§ 3 Type of services

3.1 Studio Flaer generally provides its services as a service contract (Sections 611 et seq. BGB). What is owed is the professional performance of the activity, not a specific result. This applies in particular to consulting, UX research, user testing, workshops, conceptual work, billing based on time and material, retainers, agile development (e.g. Scrum, Kanban) and services performed by specialists and freelancers.

3.2 A contract for work (Sections 631 et seq. BGB) only exists if a specific work result is expressly agreed as a work, with a fixed price and with acceptance.

3.3 Studio Flaer does not owe any commercial success, in particular no specific conversion rates, user numbers, revenues, market success, test results, search engine rankings or ratings. Research results reflect the perception of the persons surveyed and are no guarantee of the behaviour of other user groups.

§ 4 Scope of services and changes

4.1 Two rounds of corrections per project phase are included in a fixed price. A round of corrections comprises the client’s consolidated, aligned feedback on a work status and its incorporation. Further rounds of corrections are charged based on time and material.

4.2 If the client requests changes or extensions to the agreed scope of services (change request), Studio Flaer will communicate the impact on remuneration and deadlines. The change only becomes binding with the consent of both parties in text form. Until then, Studio Flaer continues to work on the basis of the previous scope.

4.3 Changes also include subsequently modified goals, target groups, requirements, content, brand guidelines, technologies, platforms or contact persons, as well as changes to work statuses that have already been approved.

4.4 If no agreement is reached on a change request, Studio Flaer charges additionally requested services at the agreed hourly or daily rates, or alternatively at its current rates.

4.5 Software, websites and prototypes are developed for the devices, operating systems, browsers and versions specified in the offer. If nothing has been agreed, the current major versions of the common browsers (Chrome, Safari, Firefox, Edge) at the time the contract is concluded apply. Adaptation to later versions is not owed.

§ 5 Cooperation of the client

5.1 The client supports Studio Flaer in providing the services. It names a contact person authorised to make decisions and provides, in good time, completely and free of charge, all required information, content, documents, data, access credentials, test environments, test users, licences and brand guidelines in common, usable formats.

5.2 The client provides feedback and approvals within five working days, unless otherwise agreed. Approvals are binding; later changes to approved work are changes within the meaning of § 4.

5.3 The client checks the work results for professional, content-related and legal correctness insofar as this falls within its area of responsibility (e.g. product data, texts, prices, regulatory requirements of its industry).

5.4 If the client fails to fulfil its obligations to cooperate, or does not fulfil them in good time or completely, agreed deadlines are extended appropriately, at least by the duration of the delay plus a reasonable restart period. Studio Flaer may charge the resulting additional effort based on time and material and claim compensation under Section 642 BGB. § 9.6 applies accordingly to capacities that were reserved but could not be used.

5.5 If a project is suspended for more than six weeks for reasons for which the client is responsible, Studio Flaer may invoice the services provided up to that point and use its capacities elsewhere. If the project is not resumed after a break of more than three months, Studio Flaer may terminate the contract; § 15.3 applies accordingly.

§ 6 Dates and deadlines

6.1 Dates and deadlines are only binding if they have been expressly agreed as binding. Binding dates require the timely cooperation of the client.

6.2 Deadlines are suspended while the client reviews drafts, interim results and test versions. The suspension begins with the submission and ends upon receipt of the feedback.

6.3 If Studio Flaer misses a binding deadline, the client must first set a reasonable grace period of at least two weeks in text form. Rights due to delay only arise after this period has expired without result.

6.4 Events of force majeure and other circumstances for which Studio Flaer is not responsible (e.g. illness of a scheduled team member without reasonable replacement, outages of third-party cloud, AI or software services, strikes, pandemics, official measures, cyberattacks) extend deadlines by the duration of the impediment plus a reasonable start-up period. If the impediment lasts longer than three months, either party may terminate the contract. Services provided up to that point are to be remunerated.

§ 7 Use of staff, freelancers and subcontractors

7.1 Studio Flaer may use its own staff, freelancers and subcontractors to provide the services. The client’s consent is not required. Studio Flaer remains responsible to the client for the contractual performance.

7.2 Studio Flaer decides on the selection, number and replacement of the persons deployed. If specific persons are named in the offer, Studio Flaer will endeavour to deploy them; in the event of absence or replacement, Studio Flaer will provide a person with equivalent expertise.

7.3 No temporary agency work. The persons deployed by Studio Flaer remain part of Studio Flaer’s organisation and are not integrated into the client’s work organisation. The right to issue instructions regarding working hours, place of work, workflow and working methods lies exclusively with Studio Flaer or with the freelancers themselves. The client is not entitled to issue employment-law instructions to them. It may give project-related requirements aimed at the agreed work result exclusively to the project lead named by Studio Flaer.

7.4 In particular, the client will not include the persons deployed in duty, holiday or shift rosters, assign them disciplinary superiors, prescribe work equipment as a prerequisite for the activity (except access that is necessary for security reasons), present them as its own employees (e.g. in e-mail signatures, organisation charts or company ID cards without marking them as external) or use them for tasks outside the agreed scope of services.

7.5 If the client violates § 7.3 or § 7.4, it indemnifies Studio Flaer against all resulting claims, fines, social security contributions and costs.

§ 8 Non-solicitation and no direct engagement

8.1 During the term of the contract and for twelve months after its end, the client undertakes not to engage, employ or actively solicit, either directly or through third parties, any persons whom Studio Flaer has introduced to it or deployed with it in the course of a project (employees, freelancers and subcontractors of Studio Flaer). This also applies to companies affiliated with the client within the meaning of Sections 15 et seq. of the German Stock Corporation Act (AktG).

8.2 Submitting a profile or CV already counts as an introduction, even if no deployment follows. In this case, the period of twelve months runs from the submission.

8.3 If the client violates § 8.1, it owes Studio Flaer a lump-sum placement fee. For freelancers and subcontractors, it amounts to three times the average monthly remuneration that Studio Flaer invoiced for this person in the last six months of deployment (alternatively 60 daily rates at the current rate); in the case of employment, 25 % of the first annual gross salary. The client is entitled to prove that no damage or significantly less damage has occurred. Further claims remain unaffected.

8.4 The prohibition does not apply if a person applies for a general public job advertisement without the client’s involvement, or if Studio Flaer agrees to the takeover in advance in text form. Studio Flaer may make its consent conditional on an appropriate placement fee.

§ 9 Remuneration

9.1 The remuneration is set out in the offer. It covers the agreed services and the rights of use described in § 12. All prices are net plus the applicable statutory value added tax.

9.2 When billing based on time and material, the agreed hourly or daily rates apply. A daily rate covers eight working hours. Billing is in units of 15 minutes. Studio Flaer provides a monthly overview of the effort.

9.3 The remuneration is already earned when the services are created, including drafts, concepts and interim results. It does not depend on whether the client actually uses or implements the results.

9.4 Unless otherwise agreed, the following are not included in the remuneration and are to be reimbursed separately:

  • travel costs and expenses (first-class train or economy flight, accommodation, mileage allowance at the maximum tax rate). Travel time counts as working time at 50 %;
  • costs for recruiting test participants and their incentives, laboratory and room rental, transcription;
  • third-party licences (e.g. fonts, image, video and music material, icons, plugins, software, SaaS services, AI services, hosting, domains);
  • costs for materials, model making, prototypes, 3D printing, printing and production;
  • courier, shipping and transport costs.

9.5 Studio Flaer charges third-party services that it purchases on behalf of the client with a surcharge of 15 % for selection, coordination and handling. Studio Flaer is entitled to commission third-party services in the name and for the account of the client; the client grants power of attorney for this purpose. Third-party licences are, where possible, issued directly to the client.

9.6 If the client cancels or postpones agreed appointments involving attendance or firmly scheduled capacity (e.g. workshops, research sessions, user tests, project days), Studio Flaer charges 50 % of the remuneration agreed for the appointment if cancelled later than ten working days in advance, and 100 % if cancelled later than three working days in advance, plus costs already incurred that cannot be cancelled (e.g. incentives, room rental, travel costs). The client is entitled to prove lower damage.

9.7 For projects with a term of more than one month or a volume of more than EUR 10,000 net, Studio Flaer may request instalment payments: 30 % upon placement of the order, 40 % after half of the project term or completion of the concept phase, and the remainder upon completion or acceptance. Services based on time and material and retainers are invoiced monthly.

9.8 For continuing obligations (e.g. retainers, maintenance, ongoing services by specialists), Studio Flaer may adjust its rates once per calendar year with two months’ notice. If the increase exceeds 5 %, the client may terminate the contract with effect from the date on which the increase takes effect.

9.9 For retainers, quotas not called off expire at the end of the respective billing period, unless it is agreed that they can be carried over to one following month. The retainer remuneration is also payable if the quota is not called off.

§ 10 Payment and default

10.1 Invoices are payable without deduction within 14 days of the invoice date. Studio Flaer may issue invoices electronically. Purchase order numbers or supplier registrations required by the client must be communicated in good time before invoicing; their absence does not prevent the invoice from becoming due.

10.2 After the payment period has expired, the client is in default without a reminder. Studio Flaer may claim default interest at the statutory rate (currently nine percentage points above the base interest rate, Section 288 (2) BGB) and the default lump sum of EUR 40 (Section 288 (5) BGB). Further claims remain unaffected.

10.3 If the client is in default with a payment, Studio Flaer may withhold further services under all ongoing contracts with the client until payment is made and refuse to hand over data and files. Agreed dates are postponed accordingly.

10.4 If, after the contract has been concluded, there are justified doubts about the client’s ability to pay, Studio Flaer may make further services conditional on advance payment or the provision of security.

10.5 The client may only set off claims that are undisputed or have been finally established by a court. It may only assert a right of retention on the basis of claims arising from the same contractual relationship.

§ 11 Acceptance (for works only)

11.1 Studio Flaer notifies the client of the completion of a work or a separable part of it. The client checks it within ten working days and declares acceptance in text form. Studio Flaer may request partial acceptance for self-contained partial services (e.g. concept, design system, individual releases or modules).

11.2 Acceptance may not be refused on account of insignificant defects. Nor may it be refused for design or aesthetic reasons, provided the service meets the agreed requirements (see § 13).

11.3 The work is deemed accepted if, after completion, Studio Flaer has set the client a reasonable deadline for acceptance and the client has not refused acceptance within this deadline, stating at least one specific defect (Section 640 (2) BGB).

11.4 Acceptance is also deemed to have taken place as soon as the client uses the service productively, publishes it, puts it into production or passes it on to third parties without having previously notified significant defects.

11.5 By accepting or approving drafts, final artwork, print or production data, the client assumes responsibility for their correctness in terms of content (e.g. texts, dimensions, product information). Claims for defects due to errors that were recognisable at the time of approval are excluded, unless Studio Flaer caused them intentionally or through gross negligence.

§ 12 Copyright and rights of use

12.1 The work results of Studio Flaer, as personal intellectual creations, are generally protected by copyright (UrhG), design law (DesignG) or as computer programs (Sections 69a et seq. UrhG). The provisions of copyright law also apply if the level of originality required in the individual case is not reached.

12.2 Studio Flaer grants the client the rights of use required for the purpose specified in the contract. Unless otherwise agreed, this is a non-exclusive right of use, unlimited in time, worldwide and for the agreed media and products. It includes the right to modify and further develop the work results for this purpose, in particular to maintain and extend design systems. Exclusive rights as well as further types of use, territories or products require a separate agreement and are remunerated separately.

12.3 The rights of use only pass to the client upon full payment of the remuneration (condition precedent). Until then, use is only permitted on a revocable basis. Studio Flaer may revoke this permission if the client is in default with a payment for more than 30 days.

12.4 Drafts, sketches, concepts, variants, mood boards, wireframes, prototypes, renderings, models and other interim results serve for alignment only. They may not be used, implemented, imitated or passed on to third parties, in whole or in part, without Studio Flaer’s consent. Drafts and variants not selected remain with Studio Flaer with all rights.

12.5 The client may pass on the work results to service providers (e.g. development teams or agencies) and affiliated companies insofar as they implement, modify or further develop them on the client’s behalf for the agreed purpose. The client shall oblige them accordingly. In all other respects, passing on or transferring rights of use to third parties requires Studio Flaer’s prior consent in text form.

12.6 If the client uses the work results beyond the agreed scope (e.g. for further products, markets, media or brands), Studio Flaer may claim the remuneration that would have been customary and appropriate for the extended use.

12.7 Pre-existing elements. In projects, Studio Flaer uses its own elements that already exist or were developed independently of the project, such as methods, templates, research guides, building blocks of design systems, UI components, code libraries, frameworks, scripts, prompts and tools. The client receives only a non-exclusive right of use to these, insofar as this is necessary for using the work result. All other rights remain with Studio Flaer. Studio Flaer may also use these elements, as well as the general knowledge and experience gained in the project, for other clients without disclosing confidential information of the client.

12.8 Suggestions, ideas and contributions by the client or its employees do not establish co-authorship and do not reduce the remuneration.

12.9 Studio Flaer and the designers involved have the right to be named as authors. For websites and digital products, Studio Flaer may request to be named in the usual place (e.g. in the imprint or credits), unless otherwise agreed.

§ 13 Creative freedom

13.1 Within the agreed requirements (briefing, brand guidelines, requirements), there is creative freedom. Complaints about the design and artistic execution are excluded as long as the requirements are met. Requests for changes based on personal taste are changes within the meaning of § 4 and are remunerated separately. The claim to remuneration for work already started or performed remains unaffected.

§ 14 Pitches, presentations and preliminary work

14.1 Presentations, pitches, concepts, drafts and work samples that Studio Flaer creates during an offer phase or tender are subject to remuneration, insofar as this has been agreed. If no remuneration has been agreed, this does not constitute a waiver of the rights to the materials.

14.2 All rights to pitch and presentation materials, ideas and concepts remain with Studio Flaer, even if they are not protected by copyright. If the client does not commission Studio Flaer, it may not use, implement or further develop them, either itself or through third parties. In the event of a violation, Studio Flaer may claim the customary remuneration for the service and the rights of use. Further claims remain unaffected.

14.3 If no order is placed after a presentation, the materials handed over are to be returned or deleted on request.

§ 15 Term and termination

15.1 Contracts with a fixed term end when the term expires. Unless otherwise agreed, retainers and other continuing obligations run for a minimum term of six months and are then extended by three months at a time unless terminated with three months’ notice to the end of the term.

15.2 Contracts for services performed by specialists or freelancers based on time and material may be terminated by either party with four weeks’ notice to the end of a month, unless otherwise agreed.

15.3 If the client terminates a contract for work before completion (Section 648 BGB), Studio Flaer receives the agreed remuneration for the services provided up to termination and, for the part not yet performed, a lump sum of 15 % of the remuneration attributable to it. The client is entitled to prove that Studio Flaer has saved higher expenses; Studio Flaer may prove a higher remuneration. Third-party costs already incurred and obligations entered into with third parties are to be reimbursed in full.

15.4 The right to extraordinary termination for good cause remains unaffected. Good cause exists for Studio Flaer in particular if the client is more than 30 days in default with payments, fails to fulfil material obligations to cooperate despite a deadline being set, violates § 7.3, § 7.4 or § 8, or if Studio Flaer is to implement content that violates laws or public morals.

15.5 Notices of termination must be given in text form.

§ 16 Software, source code and open source

16.1 Studio Flaer develops software, websites, apps and prototypes according to the requirements specified in the offer. A specific architecture, technology or programming language is only owed if it has been agreed.

16.2 Handing over source code, repositories, build scripts and technical documentation is only owed if this has been expressly agreed. If it has been agreed, it takes place after full payment. Documentation beyond comments in the code is only owed if it has been agreed.

16.3 Studio Flaer may use open source software and third-party components. These are governed exclusively by their respective licence terms, which the client complies with. Studio Flaer does not use components with copyleft licences (e.g. GPL) that would oblige the client to disclose its own code, unless this has been agreed. Studio Flaer provides a list of the components used on request.

16.4 For third-party software, services and platforms (e.g. hosting, cloud, CMS, shop systems, APIs, payment services, AI models), Studio Flaer gives no warranty for availability, function, price development, continued existence or changed terms of use.

16.5 Operation, hosting, maintenance, monitoring, data backup, security updates, updates of dependencies and adaptations to new versions of operating systems, browsers or third-party components are only owed if they have been agreed separately (e.g. in a maintenance contract). Without a maintenance contract, the client is itself responsible for secure operation, updates and compliance with statutory obligations (e.g. IT security, Cyber Resilience Act, product liability as manufacturer or provider).

16.6 Prototypes, click dummies, proofs of concept and code from design or discovery phases serve for illustration and testing. Unless otherwise agreed, they are not intended for productive use and are not optimised for security, performance, scalability or accessibility.

16.7 The client provides suitable test and production environments and carries out tests on its own responsibility before go-live. It performs a data backup before any services are deployed.

§ 17 Industrial design and physical products

17.1 Industrial design services comprise, insofar as agreed, research, concepts, drafts, sketches, renderings, 3D data, design and functional models as well as prototypes. Engineering, calculation, tool and production planning, readiness for series production, testing and certification are only owed if expressly agreed.

17.2 The client or the manufacturer it commissions is solely responsible for the technical feasibility, engineering, choice of materials, manufacture, safety, testing and approval of the product, as well as for compliance with standards, technical rules and statutory requirements (e.g. product safety, CE marking, machinery, medical device, toy or electrical equipment law, ergonomics and accessibility requirements). Studio Flaer is not the manufacturer and does not place products on the market.

17.3 Models and prototypes serve exclusively to illustrate shape, proportion and function. They are not samples for series production and are not designed for load capacity, durability or safety in use. The client ensures that they are not handed over to end users or used without supervision.

17.4 Before production begins, the client checks and approves the final data. Production or quality monitoring at manufacturers is only owed if agreed; it does not replace the manufacturer’s quality assurance.

17.5 Searches for existing third-party property rights (design, trademark, patent and utility model rights) and applications for own property rights are only owed if agreed, and are carried out in cooperation with patent attorneys or lawyers commissioned by the client. If the client applies for a design, patent or utility model based on services provided by Studio Flaer, it names Studio Flaer or the persons involved as designers or inventors and informs Studio Flaer in advance.

17.6 For industrial design services, Studio Flaer may agree a licence fee per unit sold or a share of revenue as an alternative or in addition to a lump-sum fee. In this case, the client provides annual information on unit numbers and revenues; Studio Flaer may have this information checked by an expert bound to confidentiality.

17.7 Models, prototypes and samples remain the property of Studio Flaer, unless their handover has been agreed and remunerated.

§ 18 Use of artificial intelligence

18.1 Studio Flaer may use AI-supported tools when providing its services, for example for research, analysis, drafts, texts, images, code or documentation. The results are selected, checked and revised by specialists at Studio Flaer. If the client wishes to exclude or restrict the use of AI, this must be agreed before the contract is concluded; any additional effort resulting from this is remunerated separately.

18.2 Unless otherwise agreed, Studio Flaer only enters confidential information and personal data of the client into AI services that do not use the input to train their own models or where this is contractually excluded.

18.3 Results generated predominantly by AI may not be protected by copyright under current law. Studio Flaer only grants rights of use insofar as such rights arise and belong to Studio Flaer, and gives no warranty that property rights exist in such results or that the client can prohibit third parties from using them.

18.4 Studio Flaer uses AI tools in accordance with the terms of use of their providers and takes professional care not to infringe any recognisable third-party rights. A comprehensive check for similarities with third-party works is not owed.

18.5 Insofar as obligations exist to label AI-generated content or AI systems or to ensure transparency (in particular under Article 50 of the AI Regulation (EU) 2024/1689), these lie with the client as deployer or publisher, unless otherwise agreed. If Studio Flaer develops AI-supported functions or systems for the client, the client is responsible for their lawful operation, risk classification and fulfilment of the deployer’s obligations.

§ 19 Third-party rights and legal admissibility

19.1 The client ensures that it holds all rights to the materials it provides (e.g. texts, images, logos, trademarks, fonts, data, code, product information) and that their use by Studio Flaer to the agreed extent and for self-promotion (§ 20) does not infringe any third-party rights.

19.2 Studio Flaer does not owe a legal review of the work results. Reviewing admissibility under competition, trademark, design, labelling, copyright, data protection, consumer protection, accessibility, product safety and industry-specific law, as well as trademark and name searches, is the responsibility of the client. Studio Flaer points out risks that become obvious to it during its work.

19.3 Accessibility. Studio Flaer implements accessibility requirements (e.g. WCAG 2.2 level AA, EN 301 549) insofar as they have been agreed in the offer. If nothing has been agreed, Studio Flaer takes basic principles of accessible design into account but does not owe conformity. Responsibility for compliance with the German Accessibility Strengthening Act (BFSG) and comparable regulations, including conformity assessment, accessibility statement and ongoing maintenance of content, lies with the client as provider.

19.4 Data protection and tracking. Responsibility for designing operations in compliance with data protection law (e.g. privacy policy, cookie consent, tracking, data processing agreements with third parties) lies with the client, unless Studio Flaer has been expressly commissioned to implement individual measures.

19.5 The client indemnifies Studio Flaer against all third-party claims based on materials provided by the client, on its specifications or on violations of its obligations under §§ 18.5, 19.1 to 19.4. The indemnity includes the reasonable costs of legal defence. The client supports Studio Flaer in defending against such claims.

§ 20 References and self-promotion

20.1 From the placement of the order, Studio Flaer may name the client with its name and logo as a reference, for example on its own website, in presentations, offers and social networks. This applies during the collaboration and without time limit thereafter. Studio Flaer may describe the type of services provided in general terms (e.g. “UX research and UI design for a B2B platform”).

20.2 After their publication or market launch, Studio Flaer may show the work results for self-promotion, including in the form of case studies, and use the client’s trademarks, logos and materials contained therein for this purpose. Confidential information is not disclosed in the process. Studio Flaer may show unpublished work results in anonymised form in non-public presentations to potential clients.

20.3 The client may object to the use under § 20.1 and § 20.2 in text form before the contract is concluded, for example for projects under confidentiality. A later revocation applies to future publications; materials already printed or published do not have to be withdrawn.

§ 21 Confidentiality and data protection

21.1 Both parties treat all confidential information of the other party that is marked as confidential or whose confidentiality results from the circumstances as confidential and use it only to perform the contract. This obligation applies during the term of the contract and for three years thereafter; for trade secrets within the meaning of the German Trade Secrets Act (GeschGehG), it applies without time limit.

21.2 The obligation does not apply to information that is or becomes publicly known through no fault of the receiving party, that was already known to it, or that it developed independently or lawfully received from third parties, or in the case of statutory or official disclosure obligations.

21.3 Studio Flaer obliges its employees, freelancers and subcontractors to confidentiality accordingly. Separate non-disclosure agreements (NDAs) of the client only apply if they have been expressly agreed; in the event of contradictions, they take precedence over these GTC insofar as they govern confidentiality. Naming the client as a reference under Section 20.1 does not constitute disclosure of confidential information unless this has been expressly excluded.

21.4 If Studio Flaer processes personal data on behalf of the client (e.g. in user tests with client data or during development), the parties conclude a data processing agreement under Article 28 GDPR. For research with test participants recruited by Studio Flaer itself, Studio Flaer is itself the controller, unless otherwise agreed.

21.5 Communication by unencrypted e-mail and via common collaboration tools (e.g. Figma, Slack, Microsoft Teams, Google Workspace, Notion) is permitted, unless the client prescribes other channels in advance.

§ 22 Data, files and ownership

22.1 Studio Flaer owes the handover of the agreed work results in the agreed format. Open working and source files (e.g. Figma files, Sketch, Adobe or CAD files, 3D scenes, raw research data, recordings, source code) are only owed if agreed; Studio Flaer may make their handover conditional on appropriate remuneration.

22.2 If Studio Flaer works in tools or accounts of the client, the client provides the access and licences. If Studio Flaer works in its own accounts, the client may request the transfer or duplication of the files to its account after full payment, insofar as a handover has been agreed.

22.3 Studio Flaer is not obliged to retain project data after the end of the project. Studio Flaer may delete data six months after the end of the project, insofar as no statutory retention obligations exist. The client is itself responsible for backing up its data.

22.4 Personal research data (e.g. video and audio recordings of test participants) is only handed over if the consents of the data subjects permit this and an agreement under § 21.4 exists. Otherwise, Studio Flaer hands over anonymised or pseudonymised results.

22.5 Studio Flaer returns or deletes data, data carriers and samples provided by the client after the end of the project on request. The client must delete interim results provided to it for preliminary review after alignment.

§ 23 Claims for defects

23.1 There are no claims for defects in the case of services. On the client’s complaint, Studio Flaer will rectify services that were not provided in accordance with the contract within a reasonable period at no additional cost, insofar as this is possible.

23.2 In the case of works, Studio Flaer first has the right to subsequent performance at its own discretion by rectification or new production. If subsequent performance fails twice, the client may assert its statutory rights. Damages are governed by § 24.

23.3 Defects must be reported in text form without undue delay after discovery and described so specifically that they are comprehensible and reproducible (e.g. affected function, device, browser, steps, screenshot).

23.4 Insignificant deviations, in particular those that do not impair usability and function, as well as technically caused deviations in colours, display on different devices and materials, do not constitute a defect.

23.5 There are no claims for defects if the client or third parties have changed, extended or incorrectly operated the service without Studio Flaer’s consent or operated it in an environment that was not agreed, unless the client proves that this was not the cause of the defect. The same applies to defects based on third-party components, specifications or materials of the client.

23.6 If it turns out that a reported defect does not exist or is not attributable to Studio Flaer, Studio Flaer may charge the effort for analysis and remedy at the agreed rates if the client could have recognised this with careful examination.

23.7 Studio Flaer may refuse subsequent performance until the client has paid the remuneration due less an amount appropriate to the value of the defect.

23.8 Claims for defects become time-barred twelve months after acceptance. This does not apply to claims based on intent, gross negligence, fraudulent intent, injury to life, body or health, a guarantee or under the German Product Liability Act; in these cases, the statutory periods apply.

§ 24 Liability

24.1 Studio Flaer has unlimited liability for intent and gross negligence, for injury to life, body or health, for fraudulent concealment of a defect, under a guarantee given and under the German Product Liability Act.

24.2 In the case of slight negligence, Studio Flaer is only liable for the breach of a material contractual obligation. Material contractual obligations are obligations whose fulfilment makes the proper performance of the contract possible in the first place and on whose compliance the client may regularly rely. In this case, liability is limited to the damage that was foreseeable and typical for the contract at the time the contract was concluded, but no more than the net remuneration of the order concerned, for continuing obligations no more than the net remuneration of the last twelve months before the damaging event.

24.3 Within the scope of § 24.2, Studio Flaer is only liable for the loss of data in the amount of the effort that would have been required for restoration if the client had backed up its data properly and regularly.

24.4 For services of third parties that Studio Flaer commissions in the name and for the account of the client (§ 9.5), Studio Flaer is only liable for careful selection.

24.5 The limitations of liability also apply to the personal liability of the executive bodies, employees, freelancers, subcontractors and other vicarious agents of Studio Flaer.

24.6 Claims for damages against Studio Flaer become time-barred twelve months after the start of the statutory limitation period, except in the cases of § 24.1.

§ 25 Final provisions

25.1 The law of the Federal Republic of Germany applies, excluding the UN Convention on Contracts for the International Sale of Goods (CISG) and the conflict-of-law rules of private international law.

25.2 The place of performance is the registered office of Studio Flaer in Berlin. The exclusive place of jurisdiction for all disputes arising from or in connection with the contract is Berlin, provided the client is a merchant, a legal entity under public law or a special fund under public law, or has no general place of jurisdiction in Germany. Studio Flaer may also sue the client at its registered office.

25.3 Declarations require text form (e.g. e-mail), unless these GTC provide otherwise. Oral agreements are effective but should be confirmed in text form.

25.4 The client may only transfer rights and obligations under the contract to third parties with Studio Flaer’s consent. Section 354a of the German Commercial Code (HGB) remains unaffected. Studio Flaer may assign claims for financing purposes (e.g. factoring).

25.5 These GTC are available in German and English. In the event of discrepancies, the German version prevails.

25.6 Should any provision of these GTC be or become invalid, the validity of the remaining provisions remains unaffected. The invalid provision is replaced by the statutory provision (Section 306 (2) BGB).

Design agency for UX, UI and product design in Berlin and Cologne.

Offices

  • Urbanstraße 71
    10967 Berlin
  • Stolberger Straße 90A
    50933 Cologne
  • Remote first, worldwide

Studio

  • Services
  • Work
  • About
  • Contact

Follow

  • LinkedIn

Products

  • Syntope (opens in a new tab)
  • © 2026 Studio Flaer
  • Imprint
  • Privacy
  • Terms

Visuals partly created with AI. The design work is ours.